Role of Tryptophan in the Active Site of Plant Esterase: Chemical Modification and Fluorometric Studies

Plant esterase extracted from wheat flour play key roles in the spectrophotometric detection of organophosphorus compounds (OPs) for food safety and human health. The purpose of the present study was to investigate the role of tryptophan residues in the activity and structure of plant esterase by chemical modification and fluorometric studies. Active site characterization of purified plant esterase showed the involvement of tryptophan in the catalytic activity. Only one was essential for the enzyme activity by the Tsou’s analysis. Substrate protection experiments further confirmed that the tryptophan residue was located at the substrate-binding site. Fluorescence quenching studies elucidated that the tryptophan residues were largely exposed to the solvent, and a smaller fraction of the surface tryptophan residues had electropositively charged amino acids around them. Experimental results obtained here are expected to promote the applications of plant esterase in OPs detection. Further confirmation of the existence of other critical residues and detailed explanation of their functions were also required for the elucidation of the mechanism involved in the detection of OPs.     

Assembly of peptide–thiophene conjugates: the influence of peptide content and location

Biomolecule-directed self-assembly of π-conjugated oligomers has attracted great attention in the past decade. In this contribution, two conjugates composed of quaterthiophene and tetrapeptide (Gly-Val-Gly-Val) were synthesised, namely peptide–thiophene–peptide (PTP) and thiophene–peptide–thiophene (TPT), to investigate the influence of peptide content ratio and its location in the molecular structures on the nanostructures and properties of the assemblies. Both conjugates formed organogels consisting of left-handed twisted nanostructures; however, anti-parallel β-sheets were observed in PTP while parallel β-sheets were obtained for TPT, although in both cases oligothiophenes adopted an H-like stacking mode. Obvious solvent-induced supramolecular chirality inversion from the oligothiophene segment was observed for PTP while such phenomenon was not clear for TPT. PTP and TPT gels also showed different stabilities towards temperature increase, as evidenced by variable-temperature circular dichroism study. From the data, it is suggested that the rational design of the location and ratio of peptide plays a key role in constructing materials with determined properties based on peptide–thiophene conjugates.     

Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.     

Novel WS2/Fe0.95S1.05 Hierarchical Nanosphere as a Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Fe_0.95S_1.05 with high reactivity and stability was incorporated into WS₂ nanosheets via a one-step solvothermal method for the first time. The resulted hybrid catalyst has much higher catalytic activity than WS₂ and Fe_0.95S_1.05 alone, and the optimal WS₂/Fe_0.95S_1.05 hybrid catalyst was found by adjusting the feed ratio. The addition of Fe_0.95S_1.05 was proven to be able to enhance the hydrogen evolution reaction (HER) activity of WS₂, and vice versa. At the same time, it was found that the catalytic effect of the hybrid catalyst was the best when the feed ratio was W : Fe=2 : 1. In other words, we confirmed that there is a synergistic effect between W- and Fe-based sulfide hybrid catalysts, and validated that the reason for the improved HER performance is the strong interaction between the two in the middle sulfur. WS₂/Fe_0.95S_1.05-2 hybrid catalyst leads to enhanced HER activity, which shows a low overpotential of ∼0.172 V at 10 mA cm⁻², low Tafel slope of ∼53.47 mV/decade. This study supplies innovative synthesis of a highly active WS₂/Fe_0.95S_1.05 hybrid catalyst for HER.     

Synthesis of terpinyl acetate using octadecylamine ethoxylate ionic liquids as catalysts

Terpinyl acetate, an important natural flavor, can be synthesized by esterification of α-pinene with acetic acid under acidic conditions. In this work, seven acidic ionic liquids were first synthesized, using octadecylamine ethoxylates (AC 1810, AC 1815, AC 1820, and AC 1830) as the cations, and characterized by FT-IR, ¹H NMR, and ¹³C NMR spectroscopy. The ionic liquids were then used as catalysts in the synthesis of terpinyl acetate. The effect of preparation conditions on catalyst performance was examined. It was found that the acidic ionic liquid 1-(3-sulfonic acid)propyl-3-poly(ethylene glycol) octadecylamine polyoxyethylene ether tetrafluoroborate ([PAC1815]⁺[BF₄]^?) was an excellent catalyst for synthesis of terpinyl acetate. The effects of the conditions used for preparation of terpinyl acetate were examined in detail, and the optimum preparation conditions were obtained. Under the optimum conditions, the yield of terpinyl acetate reached 35.70 %. When the catalyst was reused for the 5th time, the yield of terpinyl acetate was still 32.00 %. The results showed that effective separation and recycling of catalyst could contribute to developing a new strategy for synthesis of terpinyl acetate.     

Bilayer rGO-Based Photothermal Evaporator for Efficient Solar-Driven Water Purification[]**

Interfacial evaporation has emerged as a promising approach to produce freshwater. However, an urgent concern is that, due to the illegal discharge of industrial wastewater, most water bodies are polluted by trace volatile organic compounds (VOCs), which are easily volatilized and enriched in the collected water during the interfacial evaporation process. Herein, a bilayer photothermal evaporator was reasonably designed for contaminated water purification. The bottom hydrophilic rGO-sodium alginate (SA) sheets purposefully disintegrate water transport channels, thus quickly removing VOCs through physical adsorption. The rGO-SA-TiO₂ upper layer sufficiently absorbs incident light and therefore persistently generates reactive oxidizing species to degrade upward VOCs. Notably, the oriented microchannels inside the evaporator allow sustained light reflections to improve the utilization of solar energy. The evaporation rate can reach 1.63 kg m⁻² h⁻¹ with a considerably high VOC removal efficiency of up to 96 %. Such an integrated bilayer evaporator provides an effective strategy to obtain clean water via solar distillation.     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Estimation of the solubility product of hydrocalumite–hydroxide,a layered double hydroxide with the formula of [Ca2Al(OH)6]OH·nH2O

From aqueous NaOH/Ca(OH)₂/NaAl(OH)₄ mixtures, after allowing short reaction times we observed the precipitation of Ca(OH)₂(s) at lower, and a mixture of Ca(OH)₂(s) and a layered double hydroxide, hydrocalumite (HC) at higher aluminate concentrations. From the maximum aluminate concentration, at which the equilibrium solid phase is still portlandite (i.e., further increase in the aluminate concentration results in HC appearing in the precipitate beside the portlandite), the concentration based solubility products of two polymorphs of HC with the formula of [Ca₂Al(OH)₆]OH·nH₂O (differing in n) has been estimated and was found to be log L_HC=−11.4 at 25 °C and −12.1 at 75 °C, respectively (where L_HC=[Ca²⁺]²[Al(OH)₄⁻][OH⁻]³) and at constant ionic strength (I=1 M NaCl). To the best of our knowledge, this is the first published estimate for the solubility product of hydrocalumite. Additionally, from the composition obtained for NaOH/Ca(OH)₂/NaAl(OH)₄ mother liquors in equilibrium with Ca(OH)₂(s), attempts were made to extract the formation constant of the ion pair CaAl(OH)₄⁺. It was found, that the effects caused by the supposed formation of this solution species are too small to be reliably determined, which allowed an upper estimate for its formation constant, K, to be suggested in the temperature range of 25–75 °C (K<200 and 40 M⁻¹ at 25 and 75 °C, respectively).